Parts

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

- Aheadset preload adjusting bolt, cap and star nut - Bolt is hollow for cable pass-through

- Chromoly steel - CNC fabrication - 1.29" x 24tpi left hand thread

- Nylon construction - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 36 grams per pair

Lightweight quick release lever with a classic aesthetic. - Weight: 39g

- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains

These CNC’d lovelies will work just fine in a multi-ring setup, but they’re not equipped with shift ramps or pins, which makes them perfect for single-ring drivetrains. - Longevity, performance, and quiet operation - Material: CNC-machined 7075-T6 Aluminum - Chain Compatibility: 8-, 9-, or 10-speed compatible

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

Perfect for your road, touring or cross bike, Avid's BB5 Road brakes have all the power you need. Used with your road-style levers, they sport precision actuation as well as tool-free pad replacement. Plus, Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition.

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 204 g

This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Due to the shape of the brake pad installation tabs, this model is not compatible with Centerlock or HSX rotors - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 204 g

Box Two™ Fixed Seat Clamps are made from the finest 6061-T6 aluminum and cold-forged for strength. They are available in multiple sizes to suit a wide variety of seat tubes and riding styles. FEATURES: - Machined Rigid Frame - Secure Fixed Design SPECIFICATIONS: - Material: 6061-T6 Aluminum - Process: Cold-Forged - Hardware: Chromoly - Finish: Anodized w/Laser-Etched Graphics Size & Weight: - 25.4mm: 7 g / 0.2oz - 31.8mm: 12 g / 0.4oz

Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension.

DESCRIPTION The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. FEATURES - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three™ Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, Stainless Steel Hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm

Tested extensively by the Dutch National BMX Team, Damien Godet, Kory Cook, and numerous other elite racers, Box Two™ Freewheels combine durability with lightning-fast engagement. They feature nine, super durable pawls and are available in one of three choices -- 16, 17, or 18 teeth. To install, use the Park Tools™ FR-6 or other installation tool designed for single-speed freewheels with four notches that are approximately 32mm across measured inside to inside and 40mm outside to outside. FEATURES - 9 Pawls 108 [3.3°] Points of Fast Engagement

- Soft foam grip donuts prevent thumb blisters from riding gloveless - Intended for use with flanged BMX grips to prevent rubbing and irritation

- BMX brake cable kits for front or rear application - 1.5mm galvanized inner slick cable - Cable length: 1700mm / 67-inches - Housing length: 1750mm / 69-inches

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

- Best seller - Shock Absorbing Design - Ridged Turbo Shape - Fits 7/8" Bars - Style: with Flange - Length: 110mm

- Teflon-coated stainless steel inner wire - Includes cable, housing, ferrules, and cable tips - Cable length: 2100mm - Housing length: 1800mm - Use: Front or Rear - Length: 2100mm - Diameter: 1.5mm - Style: BMX/MTB

- A comfortable and timeless ribbed style grip suitable for BMX and cruiser use - High flange BMX style design with black press-in end plugs - Length: 145mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm