Parts & Accessories

The Rear Deck for the Spicy Curry or Boda Boda gives passengers a place to ride along or provides sturdy support for your cargo. Pair with the Bamboo Running Boards for a super stylish look to your cargo bike. - 5 Ply Bamboo - Weather resistant - Cut out for the Yepp Maxi child seat to attach directly to the rear deck - Quick 6 bolt attachment - Only compatible with Spicy Curry, Sweet Curry and the Boda Boda cargo bikes - We choose to use 3-ply Bamboo for some of our accessories because it is a durable and sustainable material. Bamboo requires little water or other resources to mature and grows quickly with Wolverine like healing capabilities. All of our Bamboo products have been tested for hazardous or harmful chemicals in congruence with EU REACH regulations and passed with flying colors. We are fully REACH compliant.

Tie-down with steel buckle perfect for attaching boxes, surfboards, guitars, tools, and other bikes to a Yuba. - Each strap 9 feet (3 m.) long - Industrial quality - Brown - 1 pair per pack - Compatible with all Yuba Cargo Bikes

Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

- Replacement parts for Bkbrn Type SGL bike racks - Sold as a set

• 24-inch long double strap • Vinyl-coated hook ends

- Bike rack RR 290 mm strut kit with hardware - Great for smaller frames - 4 bolts & nuts - 1 set/bag

• Vinyl coated hooks • 9 mm diameter • Black

Salsa's Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available for 27.2 and 31.6mm diameter seatposts - Black anodized with laser-etched logo - 44g for a 31.6mm collar - Not for use on carbon seatposts - Note: Post-Locks do not have a lip like Salsa's Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

How cool would it be to pack your stuff in a bag that clips onto your bike, then converts into a backpack when you're walking around, and when it's time to go home clips right back onto you bike? That's what Ortlieb has achieved with their Carrying System for bike panniers (sold separately). The pannier clips onto the mounting points and then you're on your way. A foam back improves air flow and comfort, two shoulder straps and a chest strap supports the weight, and there's even a carry handle if you want it. When you're ready for the bag to go back on the bike simply remove the Carrying System, roll it up, and slip it in the bag, and you're off!

If you use an ORTLIEB Back-Roller, Bike-Packer, or Velo-Shopper for your ride to work, you may want to consider the advantages of the Commuter Insert. You pack the Commuter Insert at home – with your laptop, lunchbox, documents, water bottle, pens, smartphone, change of shoes, etc. – and then simply insert it into your pannier. The advantage is that everything stays well-organized, nothing goes mysteriously missing and nothing hides in the depths of your bag. And so you save time and avoid those nervous moments of uncertainty. While the Commuter Insert is ideal for commuters, it can also be a faithful companion to anyone who transports gear from any point A to any point B. The Commuter Insert is made of lightweight, durable nylon fabric. A padded compartment for your laptop or tablet is located directly under the handle. There is a separate pen compartment and two compartments for your smartphone and money, including an integrated key chain. The large inside compartment offers plenty of space for provisions and a change of clothes. FEATURES: - Stable and tip-resistant even when empty - Two side mounts for water bottles, etc. - Flat mesh pocket (ideal for a bike lock) - Foam padding on the sides and bottom - Ideal for use with all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers - Permits access to the inside pocket of your bike pannier

Elastic strap with lower hook for Vario hybrid packs. Provides additional support for heavy loads.

If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.

Plastic inserts for QL1 and QL 2 Tophooks. Each set has 2ea. 8mm & 11mm inserts. Each set is enough to set up one Ortlieb pannier.

If you've worn out your plastic inserts on the top hooks of your QL2.1-equipped Ortlieb bag, good job! That means you're using your gear a lot. To freshen up that sweet mounting system, here are new inserts for three different rack tube diameters. Each set has 2 inserts to fit each of: 8mm, 10mm, and 12mm racks rails. Each set is enough to set up one Ortlieb pannier for any of these diameters.

Ortlieb's Ultimate5 Mounting Set is the piece that holds the bag to the bar. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate5 bag (sold separately).

Universal screw set for all Ortlieb QL1 or QL2 bags or to replace rivets.

The name of the game is finding instead of searching. The Packing Cubes save you a lot of time and frustration when it comes to packing for your bike tour. The Cubes offer an ideally organized space for your clothing, tools, toiletries, and other gear. The system was specially designed for those mission-critical little things that often slip down into the depths of your panniers or otherwise defy your earnest search efforts. The inserts also help you to keep clean and soiled things separate. The three inserts (two 6-liter units and one 5-liter unit) can be perfectly stacked in ORTLIEB Back-Rollers, Velo-Shoppers, and Bike-Packers. The durable, lightweight nylon material was specially developed to ensure a long service life. All of the Cubes are outfitted with a practical 2-way zipper to ensure easy access to their contents. Outfitted with top handles, the inserts are easy to remove from your panniers. Each Cube has additional inside and outside mesh pockets for stowing those very small objects you would like to have within reach. Given their modular design, the bags can also be used individually when you're out on short trips. FEATURES: - Each unit in the modular system can also be used individually - Volume of organizers: top and middle bag: each 6 L, lower bag: 5 L - Suitable as an insert for all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers

QL1 top hooks with handle, adjustable, Can accomadate 8mm, 11mm, and 16mm rack tubeing. For all Ortlieb panniers with QL1 systems (These hooks require a 3mm Allen key to install) -each set replaces top hooks on one pannier.

QL2 Lower hook assembly. Each set replaces the lower hook on one pannier. Includes all necessary hardware.

- QL2.1 Top hooks with handle - adjustable - can accomadate 8mm, 10mm, 12mm and 16mm racks - for all Ortlieb panniers with QL2.1 systems (tool free installation) - each set replaces top hooks on one pannier

QL1 screw set from model +1993

Shoulder strap 80 cm, 25 mm with male and female buckles "Stealth model" for Back-Roller and Front-Roller from '99 on.

Mounting set for all Ortlieb saddle-bag models including Mud-Racers, from model year '96 'til present. Additional bracket that allows the quick movement of an Ortlieb Saddle Bag to another bike.

Pick up a spare set of screws for your Ortlieb bags utilizing the awesome QL2.1 mounting system. - Includes 10 bolts and 10 plastic nuts

Stealth buckle set 25 mm, 1 set. (1 male and 1 female) for replacement closures on Back-Roller/Front-Roller top cross straps (all models '99 and above).

- Replacement cable for the Ortlieb Ultimate 4,5 & 6 Mounting systems. - Works with standard Ultimate 4,5 & 6 mounts as well as the Extension adapter part E165. - 105cm (41 inches) long.

Ortlieb's Velcro Extension greatly enlarges the carrying capacity of the Messenger Bag and Messenger Bag Pro (sold separately) especially if keeping the contents dry is not an issue.

The Jandd Reflector Mount allows riders to attach a reflector to a rack.